D1260/D1260B Owner's Manual Part III: Advanced Commands - CHG PASSCODES ? (COMMAND + 5 + 5)

•To avoid conflicting with other passcodes and duress codes, your system does not let you change passcodes to an existing passcode or to within plus or minus 2 of an existing passcode. For example, if 1234 were an existing code, your system would not let you change your code to 1232, 1233, 1234, 1235, or 1236.

Using Chg Passcodes

1.Ensure your keypad shows idle disarmed text.

2.Press the COMMAND key. The display shows *System Command*.

3.Press the 5 key and then the 5 key.

If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function.

Press the MENU> soft key to enter the

Command Menu.

Press NEXT> soft key repeatedly.

When you reach the CHG PASSCODES ?> prompt, press its adjacent soft key.

4.You will prompted for your passcode.

As soon as a number is pressed, Entering: appears on the third line next to the asterisks.

The passcode is shown as asterisks (*) when entered and advance from the right side of the display to the left until all passcode digits are entered.

5.The display changes to Enter new passcode: Enter the new passcode.

As soon as a number is pressed, Entering: appears on the third line next to the asterisks.

The passcode is shown as asterisks (*) when entered and advance from the right side of the display to the left until all passcode digits are entered.

6.Press the ENTER button.

If an invalid passcode is entered, the command center will momentarily display Passcode is already in use. Please try again.

7.If the new passcode is valid, the display changes to Enter new passcode again:

Enter the new passcode again.

As soon as a number is pressed, Entering: appears on the third line next to the asterisks.

The passcode is shown as asterisks (*) when entered and advance from the right side of the display to the left until all six passcode digits are entered.

8.If the passcode matches the previously entered passcode, the display changes to Passcode changed.

52

Bosch Security Systems 9/04 50410D