D1260/D1260B Owner's Manual Part IV:
7.You are now able to perform tasks in this area. The number of areas to which you can move will be limited by the scope of the command center.
If you try to move to an area for which the command center does not have scope, *NO AUTHORITY* is displayed.
8.When you have completed all tasks in the area you’ve moved to, simply allow the command center to
Turning On the System
Turning on Selected Areas
Areas covered in the scope of the command center can be armed individually by accessing the Master Arm function through the menu.
1.Press the Menu> key to enter the Command Menu.
2.Press the Next> soft key repeatedly until you reach the MASTER ARM ?> prompt then press the adjacent soft key.
3.You will prompted for your passcode. It will appear on the display as asterisks (*).
4.The display changes and shows MASTER ARM ALL ? with the following options:
•<Previous soft key – will scroll to the last area that can be armed (based on passcode and authority level)
•Next> soft key – will scroll to the first area that can be armed (based on passcode and authority level)
•Arm> soft key – will arm all areas (based on passcode and authority level)
•<Exit soft key – will return the display to idle text
5.If the Next> soft key is pressed, the first area that can be armed (based on passcode entered and user authority level) is displayed (AREA 1 WAREHOUSE is used an example of the first area that can be armed).
6.Pressing the Arm> soft key will cause AREA 1 WAREHOUSE is now arming… to display for 3 seconds before the prompt to arm the next available area is displayed.
Turning on Multiple Areas with a Passcode
You can use your personal passcode to turn on both perimeter and interior points in all areas where your passcode has authority. If there are areas already turned on, this function turns on all areas that are off without changing the status of the areas that are already on.
Bosch Security Systems 9/04 50410D | 71 |