Bosch Appliances D1260, D1260B Standard Displays

D1260/D1260B Owner's Manual Appendix - Standard Displays

Standard Displays

Your command center uses standard and custom displays to show the status of the security system. Many standard displays are described below. Your system may not use all of them. Descriptions of your custom text follow.

System Command

Displays when you press the COMMAND key. The system is waiting for you to enter a one or two digit number to complete the command.

Exit Now

Arming your system starts exit delay time. The command center emits a repeating beep tone and displays AREA 1 WARE HOUSE is now arming for 3 seconds and then displays Exit Now!.

Enter Passcode to Disarm

When the system is turned on, entering through a delay door starts entry delay time.

The command center emits a tweedle tone and alternates between Enter Passcode and press the ENTER key to disarm and AREA 1 WAREHOUSE is in entry delay. (AREA 1 WAREHOUSE is used as an example.)

You must turn off the system before entry delay time expires to avoid creating an alarm event.

No Authority

The system does not recognize the passcode entered.

Perimeter Delay

Indicates that the perimeter is armed (turned on) with entry/exit delay time. (See Turning On the System With Delays )

Perimeter Instant

Indicates that the perimeter is armed (turned on) without entry/exit delay time. (See Turning On the System Without Delays ).

First Disarm – Area must be disarmed first

Indicates that the function requested can only be performed when the area is disarmed. Disarm the area to perform the function.

Bosch Security Systems 9/04 50410D 95