D1260/D1260B Owner's Manual Part III: Advanced Commands - SERVICE MENU ? (9 + 9 + Enter)

Using Print Log

1.Press the Print Log ?> soft key.

2.The display changes to Enter start date:

Press the Print all events> soft key to print all events in the log.

Press the <Exit soft key to exit this function and return to idle text.

The events are sent to a connected printer and display changes to Printing all events in history for three seconds before returning to idle text.

3.Enter the start date in the form of mm/dd.

For example, to enter 12/21 as the start date, press 1 + 2 + 2 + 1.

Once you start entering digits, the Print all events> soft key is replaced with the Enter> soft key.

Press either the Enter> soft key or the ENTER button.

4.If the date entered is valid, the events for that date will be sent to a connected printer and the display will show Printing events. for three seconds, before returning to idle text.

Using Display Rev

1.Press the Display Rev ?> soft key.

2.The display will change to *Bosch D9412* Version 6-40

(D9412 and 6-40 are used as an example, other panels could be D9112, D7412, D7212).

3.The display will return to idle text after 5 seconds.

Using Service Walk Test

The Service Walk Test function is only available in the Service Menu for D9412 and D9112 panels. If the panel model is D7412 or D7212, the Service Walk Test will have to be enabled on the Function list for the command center through the panel’s programming.

1.When the display shows ### points remain to be tested you can begin. (### is the number of points).

Bosch Security Systems 9/04 50410D

65