D1260/D1260B Owner's Manual Part III: Advanced Commands - ADD/CHANGE USER (COMMAND + 5 + 6)
3.The display changes to Enter new passcode: Enter the new passcode.
As soon as a number is pressed, Entering: appears on the third line next to the asterisks.
The passcode is shown as asterisks (*) when entered and advance from the right side of the display to the left until all passcode digits are entered.
Press the ENTER button.
If the passcode matches the previously enter passcode, the display changes to Passcode added.
Pressing the Next> soft key advances to the Add/Change Level (if the panel is a D9112 or D7212) or Add/Change Card (if the panel is a D9412 or D7412).
If an invalid passcode is entered, the command center will momentarily display Passcode is already in use. Please try again.
If the passcode does not match, the command center will emit an error tone and display Passcode not changed.
Pressing the Next> soft key advances to the Add/Change Level (if the panel is a D9112 or D7212) or Add/Change Card (if the panel is a D9412 or D7412).
4.The display changes to User 123 Change this user’s passcode?
Press the Yes> soft key to change the passcode.
Press the No> soft key not to change the passcode and skip ahead to Add/Change Level (if the panel type is a D9112 or D7212) otherwise if the panel is a D9412 or D7412, the Add/Change Card appears next.
You will prompted for the user’s passcode.
As soon as a number is pressed, Entering: appears on the third line next to the asterisks.
It will appear on the display as asterisks (*).
Press the ENTER button.
The display changes to Enter new passcode again:
Enter the new passcode again. Press the ENTER button.
If an invalid passcode is entered, the command center will momentarily display Passcode is already in use. Please try again.
If the passcode matches the previously enter passcode, the display changes to Passcode changed.
Bosch Security Systems 9/04 50410D | 55 |