Bosch Appliances D1260, D1260B manual 42

D1260/D1260B Owner's Manual Part III: Advanced Commands - DOOR CONTROL (COMMAND + 4 + 6)

Cycle Door

1.If you wish to momentarily unlock an access door to allow a person into an area, press the Cycle Door> soft key.

2.The display will read *Cycle Door*1 2 3 4 5 6 7 8 if all door are at a normal state and are available.

If a door is not at a normal state, the number of the door would be replaced with a symbol indicated in Table 3.

Table 3: Door Status

Symbol Meaning

-Door is not active, in scope, or user does not have access level authority.

CDoor is on timed door sequence.

UStrike and shunt are latched active (held open).

XStrike and shunt are deactivated (secured).

FThere is a problem with the door. Call your security company.

3.Enter the number of the door you wish to cycle then press the ENTER key. This door will be cycled and the display will change to reflect the new status of the doors.

For example, if you wanted to cycle Door 3, press 3 then press the ENTER key.

The display changes to show that all the doors are at a normal state except for Door 3, which is cycled.

4.Enter another door number to cycle or press the Exit> soft key to leave this function.

Unlock Door

1.If you wish to unlock an access door to allow free access, press the Unlock Door> soft key.

2.The display will read *Unlock Door*1 2 3 4 5 6 7 8 if all door are at a normal state and are available.

If a door is not at a normal state, the number of the door would be replaced with a symbol indicated in Table 3.

3.Enter the number of the door you wish to unlock then press the ENTER key. This door will be unlocked and the display will change to reflect the new status of the doors.

For example, if you wanted to unlock Door 3, press 3 then press the ENTER key.

The display changes to show that all the doors are at a normal state except for Door 3, which is unlocked.

4.Enter another door number to unlock or press the Exit> soft key to leave this function.

Secure Door

1.If you wish to unlock an access door to allow free access, press the Unlock Door> soft key.

2.The display will read *Secure Door*1 2 3 4 5 6 7

8 if all door are at a normal state and are available.

If a door is not at a normal state, the number of the door would be replaced with a symbol indicated in Table 3 on page 42.

3.Enter the number of the door you wish to secure then press the ENTER key. This door will be secured and the display will change to reflect the new status of the doors.

42 Bosch Security Systems 9/04 50410D