46
2. Press the COMMAND key. The display shows *System Command*.

D1260/D1260B Owner's Manual Part III: Advanced Commands - EXTEND CLOSING (COMMAND + 5 + 1)

 

 

 

 

 

 

If you prefer, you may use the Command

 

 

 

 

 

 

 

 

 

 

 

 

Menu in place of steps 2 and 3 to initiate

 

 

 

 

 

 

this function.

 

 

 

 

 

 

Press the MENU> soft key to enter the

If you have not armed or extended closing, the Please

 

 

Command Menu.

 

 

 

Close Now message and beep will reappear after 10

 

 

 

minutes. Your alarm company sets the length of time

 

 

 

for the closing window. To extend the window, enter

 

 

Press NEXT> soft key repeatedly.

the new time at which you would like the reminder

 

 

 

 

 

tone to begin. This time will be the new beginning of

 

 

 

the closing window. The time length of the closing

 

 

 

window is programmed by your security company and

 

 

When you reach the EXTEND CLOSING

remains fixed.

 

 

?> prompt, press its adjacent soft key.

When you hear the warning you can:

 

 

 

• Press the Silence> soft key will silence the beep

 

 

 

 

 

and clear the message for 10 minutes

 

4. The display changes to show the current start time.

• Leave before the end of the closing window

 

 

 

 

• Stay past the scheduled end of the closing window,

 

 

 

 

 

by using COMMAND 51 to extend the closing

 

 

 

 

 

window.

 

 

 

 

 

 

 

 

 

 

 

 

 

Extending the closing window does not

 

 

 

 

 

 

 

 

 

 

 

 

effect the amount of time available to close.

 

Press the Change> soft key to change the start

 

 

 

 

 

 

 

 

For example, if your closing window starts

 

time.

 

 

 

at 4:00 p.m. and stops at 4:30 p.m. and

 

Press the Accept> soft key to accept the start time

 

 

 

you extend closing to 5:00 p.m., the

 

and return to idle text.

 

 

 

closing window will now be between 5:00

 

5. Enter the new time using a 12-hour (HH:MM)

 

 

 

and 5:30 p.m.

 

 

 

 

 

format.

1. Ensure your keypad shows idle disarmed text.

 

Ex: If the desired time is 12:34, press [1] [2] [3] [4]

Press the AM> soft key to select AM. Press the PM> soft key to select PM.

6. The display changes to show the new start time briefly before returning to idle text.

3.Press the 5 key and then the 1 key.

7. Press the Accept> soft key to accept the Close Start time.

Bosch Security Systems 9/04 50410D