D1260/D1260B Owner's Manual Part IV: Multi-Area Use -

5.If the Next> soft key is pressed, the first area that can be armed (based on passcode entered and user authority level) is displayed (AREA 1 WAREHOUSE is used an example of the first area that can be armed).

6.Pressing the Arm> soft key will cause AREA 1 WAREHOUSE is now arming… to display for 3 seconds before the prompt to arm the next available area is displayed.

7.Once all available areas have been displayed, the display returns to ARM INSTANT ALL ?

8.To instantly arm all the areas that are within the scope of the command center, press the Arm> soft key.

9.This display changes to show AREA 1 WAREHOUSE All On Instant indicating that the all areas are armed.

Turning Off the System

Turning Off Multiple Areas with a Passcode

This function is useful for turning off multiple areas with a few keystrokes. It is quicker than disarming several areas independently. Your passcode must have the proper authority level for each area.

•After enter your passcode, the following will display Disarm: 12345678 All user-authorized areas are now disarmed. (Not all area number may appear due to what areas are in the scope of the command center.

•When an area is turned on (armed), you must enter a door programmed for entry delay time. Opening the door, starts the entry delay time. Failing to turn off the system before the entry delay time expires or entering through a door not programmed for entry delay time, causes an alarm.

•If this happens, silence the alarm by entering your personal passcode and pressing ENTER. Call your security company to let them know that it is not an emergency situation.

Turning Off Multiple Areas with Disarm All

•This function turns off multiple areas with a few keystrokes. It is quicker than disarming several areas independently. Your passcode must have the proper authority level for each area. This function works the same as entering your passcode to disarm, but allows the Disarm All feature to be included in the Command Menu.

•When an area is turned on (armed), you must enter a door programmed for entry delay time. Opening the door, starts the entry delay time. Failing to turn off the system before the entry delay time expires or entering through a door not programmed for entry delay time, causes an alarm.

•If this happens, silence the alarm by entering your personal passcode and pressing ENTER. Call your security company to let them know that it is not an emergency situation.

1.The display initially shows that the system is armed.

Bosch Security Systems 9/04 50410D

73