D1260/D1260B Owner's Manual Part IV: Multi-Area Use - Turning Off the System

2.Press the Menu> key to enter the Command Menu.

3.Press the Next> soft key repeatedly until you reach the DISARM ?> prompt then press the adjacent soft key.

4.If entering through a door which is part of an area that is armed, the display changes to show:

5.Enter your passcode and press ENTER.

The passcode is shown as asterisks (*) when entered and advance from the right side of the display to the left until all the passcode digits are entered.

6.If the entered passcode is valid, the display changes to show DISARM ALL?

Press the Disarm> soft key to disarm all armed areas.

Press the Next> soft key to go to the first armed area (see Turning Off Selected Areas).

Press the <Previous soft key to go to the last armed area.

Press the <Exit soft key to return to idle text.

7.If the Disarm> soft key is pressed to disarm all areas, the display changes to show Disarm: 12345678 All user-authorized areas are now disarmed. indicating that all areas are being turned off. Command center scope and/or your authority level limit the actual number of areas you may turn off.

For example, if you have authority to disarm all 8 areas but the scope of the command center you’re using is limited to areas 1, 2, and 5, then you will only be able to turn off areas 1, 2, and 5.

Turning Off Selected Areas

If your passcode has the proper authority level this function allows you to turn off areas other than the one you are in.

1.The display initially shows that the system is armed.

2.Press the Menu> key to enter the Command Menu.

3.Press the Next> soft key repeatedly until you reach the DISARM ?> prompt then press the adjacent soft key.

4.If entering through a door which is part of an area that is armed, the display changes to show:

74

Bosch Security Systems 9/04 50410D