![](/images/new-backgrounds/1242445/2424459x1.webp)
High Speed Pan/Tilt System | Safety en | 5 |
|
|
|
1Safety
1.1Important safety instructions
Read, follow, and retain for future reference all of the following safety instructions. Heed all warnings on the unit and in the operating instructions before operating the unit.
1.Cleaning - Unplug the unit from the outlet before cleaning. Follow any instructions provided with the unit. Generally, using a dry cloth for cleaning is sufficient, but a moist
2.Heat Sources - Do not install the unit near any heat sources such as radiators, heaters, stoves, or other equipment (including amplifiers) that produce heat.
3.Object and liquid entry - Never push objects of any kind into this unit through openings as they may touch dangerous voltage points or
4.Lightning - For added protection during a lightning storm, or when leaving this unit unattended and unused for long periods, unplug the unit from the supplied voltage and disconnect the cable system. This will prevent damage to the unit from lightning and power line surges.
5.Controls adjustment - Adjust only those controls specified in the operating instructions. Improper adjustment of other controls may cause damage to the unit. Use of controls or adjustments, or performance of procedures other than those specified, may result in hazardous radiation exposure.
6.Overloading - Do not overload outlets and extension cords. This can cause fire or electrical shock.
7.Power sources - Operate the unit only from the type of power source indicated on the label. Before proceeding, be sure to disconnect the power from the cable to be installed into the unit.
–For 24 VAC units, voltage applied to the unit's power input should not exceed ±10% VAC.
–If unsure of the type of power supply to use, contact your dealer or local power company.
8.Servicing - Do not attempt to service this unit yourself. Opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
9.Damage requiring service - Unplug the unit from the power source and refer servicing to qualified service personnel when any damage to the equipment has occurred, such as:
–the power supply cord or plug is damaged;
–liquid has been spilled in or on the equipment;
–an object has fallen into the unit;
–unit has been dropped or the unit cabinet is damaged;
–unit exhibits a distinct change in performance;
–unit does not operate normally when the user correctly follows the operating instructions.
10.Replacement parts - Be sure the service technician uses replacement parts specified by the manufacturer, or that have the same characteristics as the original parts. Unauthorized substitutions may cause fire, electrical shock, or other hazards.
Bosch Security Systems | Instruction Manual | F01U.073.990 Version 1.0 2007.07 |