High Speed Pan/Tilt System | Configuring the System en 39 |
|
|
The character being edited flashes and the joystick (up and down) can be used to change it. After making the change, confirm and continue to edit the text, or else exit with the Iris but- ton.
EDIT TEXT MENU
v _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
> 1ABC | 2DEF | 3GHI | 4JKL |
5MNO | 6PQR | 7STU | 8VWX |
9YZ | 0()x |
|
Fig. 11.6 Edit Text Menu
Offset Pan
By default, the offset pan is +0.00. The value can be changed to move the default pan position of the unit to wherever is convenient. For example, if the installation requires that the NORTH position should be at 0.00 ° (pan), then an offset pan can be entered to compensate for any deviation from NORTH. After mounting, the NORTH position was found to be +41.37 ° (pan position); therefore, the offset pan should be set to - 41.37 ° to make the pan +0.00 ° position point to NORTH.
This has an effect on the Area Titles as defined in the Area Position menu. In the above exam- ple, after the offset pan has been set to
11.2.3Display Parameters
The Display Parameters menu is used to enter the settings menus for the device movement parameters.
DISPLAY PARAMETERS |
| |
1 | - OSD VIDEO ENABLING | : YES |
2 | - VIDEO CHARACTER TYPE | : 000 |
3 | - HORIZONTAL DELTA | : 000 |
4 | - VERTICAL DELTA | : 000 |
5 | - ADDRSS NUMBER | YES |
Fig. 11.7 Display Parameters Menu
OSD Video Enabling | Set to YES to superimpose the menu text over the video signal |
| from the camera. Set to NO to have a blue screen behind the |
| menu TEXT. |
|
|
Video Character Type | Set to 0 to make the background of the text to transparent; set to |
| 1 to make it black. |
|
|
Horizontal Delta/Vertical | These set the position of reference to the titler so that the text |
Delta | can be centralized. |
|
|
Address Number | If enabled, the address number of the unit is shown at the top left |
| of the screen during normal operation. |
|
|
Bosch Security Systems | Instruction Manual | F01U.073.990 Version 1.0 2007.07 |
