34 en Configuring the SystemHigh Speed Pan/Tilt System
10.2 | Changing the Settings |
To change a setting, proceed as follows:
1.AUX ON - 200 - Enter to enable the OSD.
2.Move the cursor to the parameter to be changed.
3.Press the confirmation (Focus) button. The field starts flashing, indicating that it is in change mode. Operating the joystick (up and down) shows the alternative choices.
4.After identifying the desired selection, press the confirmation (Focus) button; the param- eter stops flashing.
Note: For
10.3 | Changing the Numeric Fields |
To change a numeric field, proceed as follows:
1.Use the joystick to scroll to the parameter you would like to edit.
2.Press the confirmation (Focus) button. The cursor starts flashing for the character to be changed, indicating it is in edit mode.
–The minimum and maximum values allowed are displayed at the bottom of the screen. If you try to insert a value outside the limits, the field is forced to the mini- mum or maximum allowed value.
–Operating the joystick (up and down) shows the alternative choices. If there is more than one field on the same line, it is necessary to select the field by moving the joy- stick (left and right).
3.After making the change, press the confirmation (Focus) button.
–The first digit in the numeric field to be changed flashes and the last line of the dis- play shows the accepted limits for the field.
–Move within the field (left and right) and change the sign or the numeric value (up and down).
Note: For
11 | Configuring the System | |||
| The UPH High Speed Pan/Tilt can be configured through the | |||
| the main menu by pressing AUX ON - 200 - Enter. | |||
|
|
|
| |
| MAIN MENU |
|
| |
| 1 | - LANGUAGE |
| |
| 2 | - DISPLAY SETUP |
| |
| 3 | - MOTION PARAMETERS |
| |
| 4 | - CAMERA PARAMETERS |
| |
| 5 | - LOAD DEFAULT CONFIGUR. |
| |
| 6 | - SETUP INFO |
| |
|
|
|
|
|
Fig. 11.1 OSD (On-screen Display) Main Menu
F01U.073.990 Version 1.0 2007.07 | Instruction Manual | Bosch Security Systems |
