10 en DescriptionHigh Speed Pan/Tilt System
2.3 | Safety Rules |
To ensure safety, the following warnings are specified:
–The device must be installed and maintained by skilled technical personnel.
–Connect the device to a power source corresponding to the indications given on the marking label.
–The device has been designed for permanent installation in a building or other suitable structure.
–Moving parts may result in risk of injury, therefore, the device should be mounted so that it is accessible only to the technician/installer.
–Place the safety label near the UPH. See Figure 6.4 for illustration of safety label.
–Before carrying out any technical work on the UPH, tilt the UPH all the way up or all the way down, then disconnect the power supply and cables from all other devices.
–Do not use power cables with signs of wear or aging.
–Do not use the device in the presence of inflammable substances.
–Do not allow children or unauthorized personnel to use the device.
–The device should be switched OFF when the power supply has been disconnected and the connecting cables to other devices have been removed.
–Keep this manual for future reference.
CAUTION! Before disconnecting the power supply to the UPH, tilt the device either all the way up or all the way down. When the UPH loses power,
!depending on how it is positioned, the unit may drop slightly forward or backward. Therefore, failure in correctly positioning the UPH before disconnecting the power supply may result in personal injury or possible damage to the device.
3Description
The Bosch
ple, a wide variety of video cameras and lenses, including the optimized DinionXF camera and zoom combinations, are available.
F01U.073.990 Version 1.0 2007.07 | Instruction Manual | Bosch Security Systems |
