Bosch Appliances UPH-3D On-screen Display OSD, Moving Around the Menus, Using the Joystick, Enter

32 en On-screen Display (OSD) High Speed Pan/Tilt System

			NOTICE! High temperatures can also have a negative effect on camera image. If
			the ambient (outside) air temperature exceeds 40 deg Celsius (104 deg
			Fahrenheit), the HSPT will continue to operate, however some unusual effects
			may appear on the video signal. These are blemishes that appear as very small
			white dots on the video picture. They are usually only noticeable during and few a
		i	few hours after dusk, when the overall scene becomes darker, and the housing is
			still cooling down as the sun goes down.
			Continued exposure of the HSPT to excessive ambient (outside) air temperatures
			will effect the long-term reliability of the HSPT, cause blemished to become more
			severe, and may introduce fixed pattern noise (FPN) on the video signal.
			Solution: via Bilinx change the SensUp setting in the camera to OFF; this reduces
			the number and intensity of the blemishes.
9	On-screen Display (OSD)
	During normal UPH operation, it is possible to activate the on-screen menu in order to set the
	advanced functions using the corresponding key/s.
	When using a Bosch keyboard, control the OSD with the Iris and Focus buttons. For dynamic
	masking, the SET - 1 - Enter and SET - 2 - Enter keys are used.
	Consult the user’s manual for other keyboard brands.
9.1	Using the Joystick
	In order to move through the OSD, move the joystick up or down through the menus.
	To enter a menu, press the Focus Near or Focus Far button. To exit a menu, press the Iris
	Open or Iris Close button.
10	Moving Around the Menus
	Each on-screen display (OSD) shows a list of parameters or submenus that can be selected by
	the operator. For example, to access the main menu in the High Speed Pan/Tilt (see
	Figure 10.1), click AUX - ON - 200, then Enter. If the camera is a DinionXF option, then the Din-
	ionXF’s main menu (see Figure 10.2) can be accessed by clicking AUX - ON - 46, followed by
	Enter. The DinionXF’s Installer menu can be accessed by clicking AUX - ON - 801, followed by
	Enter.
	1.	To scroll through the parameters, move the cursor by operating the joystick up and down.
		– To scroll through the parameters, move the cursor by operating the joystick up or
			down.
		– The cursor is indicated by the “” symbol at the beginning of a line, i.e. on the left
			side of the screen/monitor.
	2.	The “” symbol at the end of a line, i.e. on the on the right of the screen/monitor, indi-
		cates the presence of a submenu. To enter the submenu, confirm the menu item by
		pressing the Focus Near or Far key.
	3.	To exit the submenu, press Iris Open or Iris Close button.

F01U.073.990 Version 1.0 2007.07 Instruction Manual Bosch Security Systems