Scan Using the Control Panel

Send Scanned Documents Directly to an Email Address (ADS-1500W only)

a b c d

Load your document.

Press d or c to display to E-mail Server.

Press to E-mail Server.

Select the E-mail address you want to send to by doing one of the following:

If you want to select an E-mail address from the Address Book, see Select an E-mail Address from the Address Book on page 143.

If you want to enter an E-mail address manually, see Enter an E-mail Address Manually on page 144.

NOTE

 

6

 

You can select up to 200 E-mail addresses from the Address Book and enter up to 50 E-mail addresses manually. The scanned data will be sent to all of the addresses at the same time.

e

f

Press OK and then do one of the following:

If you want to use the default settings, go to h.

If you want to change the default settings, go to f.

Press Options.

g Select the settings for 2-sided Scan, Scan Type, Resolution, File Type, Document Size, Auto Deskew and Skip Blank Page as needed. Press OK.

NOTE

•If you want to save the settings as a new default, press Set New Default.

•If you want to restore all settings to the factory settings, press Factory Reset.

h Press Start.

The machine starts scanning and then sends the scanned document to the E-mail address directly.

NOTE

If you want to save the settings as a shortcut, press Save as Shortcut. For more information, see Create Scan Shortcuts (ADS-1500W only) on page 163.

Select an E-mail Address from the Address Book

a b c

Press d or c to display to E-mail Server.

Press to E-mail Server.

Press Address Book.

143