Prepare Your Network

Configure Network Scanning for Macintosh

If you want to scan from the machine on a network, you must choose the networked machine in the Device Selector application from the Model drop-down list in the main screen of ControlCenter2. If you have already installed the MFL-Pro Suite software following the network installation steps in the Quick Setup Guide, this selection should already be made.

To use the machine as a network scanner, the machine must be configured with a TCP/IP address. You can set or change the address settings from the Control Panel.

a Click the

(ControlCenter2) icon in the Dock.

4

The ControlCenter2 window will appear.

45