Appendix

Status

One-push

WLAN Setup

Error

Descriptions

The machine cannot detect a wireless access point/router that has WPS or AOSS™ enabled. To configure your wireless settings using WPS or AOSS™, you must operate both your machine and the wireless access point/router. Confirm your wireless access point/router supports WPS or AOSS™, and try setup again. If you do not know how to operate your wireless access point/router using WPS or AOSS™, see the documentation provided with your wireless access point/router, ask the manufacturer of your wireless access point/router, or ask your network administrator.

One-push WLAN setup failed. Turn the machine off and on, and then try setup again.

Two or more wireless access points that have WPS or

AOSS™, enabled areB detected. Do one of the

following:

Confirm that only one wireless access point/router within range has the WPS or AOSS™ method active and try setup again.

Try setup again after a few minutes in order to avoid interference from other access points.

1When the LED is available:

Otherwise:

2When a plastic card is inserted into the machine:

Otherwise:

3When all LEDs except the WiFi light are off:

Otherwise:

232