Appendix
Status
File Name
Cannot Be Used (Scan to USB)
Unusable Device (Scan to USB)
Unusable USB Device (Scan to USB)
USB Hub Not Supported (Scan to USB)
Authenticate Error (Scan to FTP)
Server Time Out (Scan to FTP)
Descriptions
The maximum sequential number for the file name has
been reached. Press | , |
delete unused files from the USB flash drive and then try again.
An unsupported USB device is inserted in the USB Direct Interface. Remove the unsupported USB device, such as a mouse, from the USB Direct Interface.
An unusable device is inserted in the USB port. Disconnect the device, turn the machine off and then on.
A hub or USB flash drive with a hub is inserted in the USB Direct Interface. Remove the unsupported device, such as a USB hub or USB flash drive with a hub, from the USB Direct Interface.
A server authentication error
occurred because the FTP B user name and password you entered are incorrect or not configured correctly. Confirm
that the user name and password are configured or entered correctly and then try again.
Check the following and then try again.
The network settings are correct.
Your wireless access point/router is turned on.
The remote FTP server is turned on.
The name (or IP address) of the FTP remote server is correct.
230