Brother FAX-1030Plus, Fax-1020Plus owner manual Tel

HOW TO USE ON-SCREEN PROGRAMMING (OSP) AND HELP KEY - CHAPTER 3

Level one	Level two	Explanation of Options	Factory	Chapter
function	function		setting
		If you set COVERPAGE to ON, you can send your
	3. COVERPG	documents with a Cover Page generated by your
		machine. When the COVERPAGE setting is ON,	OFF	6
	ON/OFF
		you can select a Cover Page comment.
		ON/OFF
	4. ERROR	If you set ERROR RE-TRANSMISSION to ON,
		the machine automatically resends the page once	OFF	6
	RE-TX	an error occurs.
		ON/OFF
		You can avoid having an incoming fax on separate
5. USER	5. REDUCTION	pages by printing a reduced copy of the incoming	AUTO	7
		document. The reduction methods are AUTO or
OPTIONS
		Fixed ratio:
		AUTO/100%/93%/87%/75%
	6. MEM.	Your fax machine will automatically store any
		incoming faxes in its memory if it runs out of paper.	ON	7
	RECEIVE
		ON/OFF
	7. CLOCK	You can adjust the installed clock on a one hour
		basis according to summer/winter time change.		4
	CHANGE
		SUMMER/WINTER
	8. MEMORY	Prohibit most functions except receiving faxes into
	SECURITY		OFF	4
		memory.
	(Only for FAX 1020 Plus)
		There are two different types of dialling and you
	1. TONE/	must select the type of signal suitable for your	TONE	4
	PULSE	telephone exchange.
		TONE/PULSE
		This is the number of rings before the fax machine
	2. RING	answers the call when in F/T or FAX Answer	2	7
	DELAY	Mode. 1/2/3/4 rings
	3. SPEAKER	You can adjust the speaker volume with this function.	LOW	7
	VOLUME	OFF/LOW/MEDIUM/HIGH
6. TEL
	4. ICM REC.	You can adjust the monitor volume of incoming
OPTIONS
	MONITR	voice message being recorded into the Message	LOW	10
		Manager Memory.
	(Only for FAX 1030 Plus)
		OFF/LOW/MEDIUM/HIGH
	5. F/T RING	F/T RING TIME sets the time for simulated ringing	20	7
	TIME	in F/T mode.
	(4. on FAX 1020 Plus)	10/20/30/60 seconds (For U.K.)
		10/20/30/45 (For Ireland)
	6. RING
	VOLUME	The settings are OFF/LOW/MEDIUM/HIGH.	MED	7
	(5. on FAX 1020 Plus)

3-4