Brother MFC 4350 Manual Transmission, Automatic Transmission, Manual and Automatic Fax Redial

S E T U P S E N D 55

See

One Touch

Dialing

p. 76

Manual Transmission

Manual transmission lets you hear the dial tone, ringing and fax receiving tones before sending the fax.

1Insert the document face down in the feeder.

2Pick up the handset and listen for a dial tone —OR—press Hook and listen for a dial tone.

3Enter the fax number you want to call (you can enter the digits using the dial pad, or you can enter a One Touch or Speed Dial number or you can call from the Tel-index).

4When you hear the fax tone, press Start .

5If you’re using the handset, hang up.

See

Speed Dialing

p. 76

Automatic Transmission

This is the easiest way to send a fax. IMPORTANT: Do not pick up the handset, or press Hook .

1Insert the document face down in the feeder.

2Enter the fax number using One Touch, Speed Dial, Tel-index or the dial pad.

3Press Start .

Manual and Automatic Fax Redial

If you’re sending a fax manually and the line is busy, after you disconnect the call press Redial/Pause to retry the number.

If you’re sending a fax automatically and the line is busy, the MFC will automatically redial up to three times at 5 minute intervals.