Brother MFC 4350 manual Storing Numbers for Easy Dialing, Storing One Touch Dial Numbers

NAME:

7	71
C H A P T E R S E V E N
Setup Auto Dial
Numbers

Storing Numbers for Easy Dialing

See

One Touch

Dialing

p. 76

See

Changing

One Touch

and

Speed Dial

Numbers

p. 73

You can set up your MFC to do three types of easy dialing: One Touch, Speed Dial, and Groups for Broadcasting of faxes.

Storing One Touch Dial Numbers

You can store 24 fax/phone numbers that you can dial by pressing one key (and Start ). To access numbers 13 to 24, hold down the Shift key. You also can store names with these numbers. When you press a One Touch dial location, the screen displays the name or number as the call is dialed.

One Touch keys are not the dial pad keys. They are the 12 keys (numbers 01–24) located to the right of the dial pad.

1Press Function , 1 , 6 , 1 .

2Press the One Touch key where you want to store a number. (One Touch key

01has been pre-programmed for the Brother Fax-Back System (USA only). You can override it if you wish.) The screen displays the location you selected.

3Enter a number (up to 20 digits). If you want to enter a pause in the dialing sequence (for example, to access an outside line), press Redial/Pause as you’re entering digits. Pressing Redial/Pause enters a

3.5 second pause when the number is dialed, and a dash appears on the screen.

4Press Set . The screen prompts you to enter a name for this number.