U S I N G T H E M F C W I T H Y O U R C O M P U T E R

119

 

 

 

Installing the Brother Software

1Insert the Brother CD-ROM into your CD-ROM drive.

2Enter the command for your version of Windows® , if needed.

After you insert the Brother CD-ROM, you must type the appropriate command for your version of Windows® :

If you are using Windows® 3.1 or 3.11, from the Program Manager: click File, then Run, then type x:SETUP.EXE. (“x” is the drive letter for your CD-ROM drive.) This will start the Software Installation program.

If you are using Windows® 95, 98 or Windows NT® Workstation Version 4.0, the Software Installation program appears automatically when you insert the Brother CD-ROM.

For Windows® 95, 98 and Windows NT® Workstation Version 4.0, you can also click on Start at the Desktop, select Run and then enter x:\SETUP.EXE

The Brother LOGO will be displayed on the screen.

If you are using Windows NT® 3.51 or earlier, the following error message will appear on the screen:

You are running Windows NT® 3.51 or earlier. Brother MFL Pro does not support this version of Windows NT® . YOU MUST UPGRADE TO WINDOWS NT 4.0 AND REINSTALL MFL Pro!!

If you are using Windows NT® Workstation 4.0 and you are not logged-in as the Administrator, an error message will appear explaining the problem.

Page 133
Image 133
Brother MFC 4350 manual 119, Installing the Brother Software