Brother MFC 4350 manual Canceling a Job While Scanning the Document, Insert Document

70 C H A P T E R S I X

See

Delayed Fax

p.66

and

Setting Up

Polling

Transmit

p.69

5Press 1 to select DOC if you want your MFC to scan the printed document at the time it is polled—OR—Press 2 to select MEMORY.

ACCEPTED￿

OTHER SETTINGS?

1.YES 2.NO

6Press 1 if you want to select additional settings. The display returns to the SETUP SEND menu—OR—Press 2 if you are finished choosing settings and go to step 7.

7Press Start .

If you pressed 1 in Step 5, the printed document remains in the document feeder until your MFC is polled. However, you can "interrupt" it to send another fax.

Canceling a Job While Scanning the Document

You can cancel a job while you are scanning it into memory by pressing Stop . Eject the document by pressing Stop again.

Interrupting Delayed Fax and Polling Transmit Jobs

You can send a fax or make a copy now, even if you have the MFC set to send a fax later or to be polled. However, you cannot use automatic redial or the Function mode.

1Press Function , 1 , 5 .

2Wait 2 seconds, then remove the documents that are waiting in the

feeder.

INSERT DOCUMENT

3Place the “new” document you want to send now in the feeder.

4Enter the new fax number for the documents you want to send now.

5Press Start .

6After the transmission is finished, place the “old” documents back into the feeder.

7To restore the Delayed Fax and/or Polling.

Press Function , 1 , 5 .