Brother manual MFC 4350, MFC 4650 and MFC 7750 Control Panel Keys, Dial Pad

I N T R O D U C T I O N 5

MFC 4350, MFC 4650 and MFC 7750 Control Panel Keys

1Hook

Lets you dial telephone and fax numbers without lifting the handset.

2Hold

Lets you put calls on hold.

3Redial/Pause

Re-dials the last number called. Also inserts a pause in autodial numbers.

4Speed Dial

Lets you dial stored phone numbers by pressing a two-digit number.

5Dial Pad

Dials phone and fax numbers and can be used as a keyboard for entering information into the MFC.

6Shift

This key is used to access the "13" through "24" One Touch numbers. In the printer mode when shift is pressed together with Test/ Reset, it resets and restores the MFC to the factory default settings.

7One Touch Dial Keys

These 12 keys give you instant access to previously stored phone numbers.

8Enlarge

Enlarges copies depending on the ratio you select: 200%, 150%, 125%, 120%, and 100%.

9Sort

Use this key when you want multiple copies of a multiple page original, copied in order.

10Stop

Stops a fax, cancels an operation or exits from function mode.

11Photo

This key is used to copy photographs.

12Reduce

Reduces copies depending upon the ratio you select: 100%, 93%, 87%, 75%, and 50%. You can also use the Auto Reduction function to have the MFC automatically calculate the reduction ratio that fits the size of your paper.

13Start

Starts sending a fax.

14Copy

Makes a copy.

15FF/Cont

When the LCD shows REMAINED DATA, you can turn the MFC OFFLINE and then press this key to print the data that is in the memory. Also, it clears operation and machine errors.

16 Print Priority 21 Resolution

When this key is pressed, all faxes will be received into memory without first printing and can be printed later. This key also increases the memory available for printing, without decreasing memory available for memory transmissions and incoming messages.

Sets the resolution when you send a fax.

22Tel-index

Lets you look up numbers stored in the dialing memory.

23Volume High/Low

Lets you adjust speaker, ring and handset volume.

17Test/Reset

This key is used to print a test page. When it is pressed together with Shift, it clears the data from the printer memory, cancels an error status, and then resets and restores the MFC to the factory default settings.

24Clear

Deletes entered data or backs up one step in function procedure.

25(Left Arrow)

(Right Arrow)

Moves the LCD cursor to the left or right.

18On/Off Line

This key is used to turn the printer online (ready to receive PC data) and offline (not ready to receive PC data) alternately. When the printer is online, the LCD displays ONLINE.

19Help/Broadcast

26Liquid Crystal Display (LCD)

Displays messages to help you set up and operate your MFC.

27Set

Stores a function setting into the MFC.

Prints a quick reference Help List. Also, you can use this key whenever you want to send faxes to many different locations (maximum of 174 locations) at once.

20Mode

Select how the MFC will handle incoming calls.

28Function

Lets you access the function and programming mode.

29Toner Empty LED

The Toner Indicator flashes on and off when toner is low, so you'll know to order another toner cartridge. You will be able to print until the indicator stays on.