Brother MFC 4350 manual Simultaneous Printing/Faxing, 175, Paper Tray, Choosing Acceptable Paper

On/Off Line

U S I N G T H E M F C A S A P R I N T E R 175

2After the first page is printed, the dialog box appears and prompts you to load the next page. Load a sheet and select OK to resume printing.

3Repeat Steps 1, 2, and 3 until you have finished printing.

•When you use manual feed slot, it is best to first press Print Priority . This

allows you to print PC data without interruption from incoming faxes. Incoming faxes will be stored in the MFC's memory. To continue printing PC data, press FF/Cont after each page has printed.

•To stop or clear the manual feed, turn the MFC offline by pressing the

key then, press Shift and Test/Reset —OR—you can stop it with a PC command.

•If you do not select manual paper feed, and insert a page in the manual feed slot, the MFC will load the first page from the manual feed slot and subsequent pages from the multi-purpose feeder.

Paper Tray

The MFC ejects paper with printed surfaces face down into the paper tray at the front of the MFC. When you use transparencies, remove each sheet immediately after printing, to prevent a paper jam or curled sheets.

Simultaneous Printing/Faxing

See

Acceptable

Paper

p. 18

Your MFC can print data from your computer while sending or receiving a fax, or while scanning information into the computer. However, when the MFC is copying or receiving a fax on paper, it pauses the PC printing operation, and resumes when copying or fax receiving is complete. Fax sending continues during PC printing.

Choosing Acceptable Paper

It is recommended that you test paper, especially special sizes and types of paper, on the MFC before purchasing large quantities.

Avoid feeding labels with carrier sheets exposed, or your MFC will be damaged. Avoid using coated paper, such as vinyl coated paper.

Avoid using preprinted or highly textured paper.