Brother MFC 4350 manual Distinctive Ringing, MF Link

S E T U P R E C E I V E 49

See

Using the MFC

with Your

Computer

p. 109

Setting Multi-Function Link Pro Mode

(For MFC 4650, MFC 6650MC and MFC 7750 Only)

If you connect your MFC to your PC, you can receive faxes into your PC. After completing all setup for Multi-Function Link Pro mode, you can turn on Multi-Function Link Pro to reroute incoming faxes to your PC.

1Press Function , 1 , 2 , 0 .

The screen displays

0.MF LINK

2Press or to select ON (or OFF).

3Press Set when the screen displays your selection.

4Press Stop to exit.

Distinctive Ringing

This MFC feature lets you use the Distinctive Ringing subscriber service offered by some telephone companies, which allows you to have several telephone numbers on one phone line. Each phone number has its own Distinctive Ringing pattern, so you’ll know which phone number is ringing. This is one way you can have a separate phone number for your MFC.

Your MFC has a Distinctive Ringing function, allowing you to dedicate one phone number just for receiving faxes. You’ll need to follow the directions below to “register” the new Distinctive Ringing pattern, that was assigned by the Telephone Company, so your MFC can recognize its incoming calls.

You can change or cancel the Distinctive Ringing pattern at any time. You can switch it off temporarily, then turn it back on. When you get a new fax number, be sure to you reset this function.

You can register only one Distinctive Ringing pattern with the MFC. Some ringing patterns cannot be registered.

■The MFC will answer only calls to its registered number.

■To have your TAD answer only the main number, the MFC must be in Manual Mode.

■In FAX/TEL or FAX mode, the MFC will answer all numbers on the phone line.