Brother ULT2002D operation manual Tape or Elastic Attaching

Tape or Elastic Attaching

1.Select a straight stitch pattern, and attach presser foot “J”.

Set the stitch length to 4.0 mm, and loosen the upper thread tension to 2.0.

Note

Be sure that neither the automatic reinforcement

nor the automatic thread cutting is selected.

2.Sew 2 rows of straight stitches on the right side of the fabric, then pull the bobbin thread to gain the neces- sary gather.

Note

Before sewing the straight stitch, rotate the balance wheel and pull up the bobbin thread, grasping the top and bob- bin thread pull a length of thread out from the rear of the machine. (Be sure that the presser foot is lifted).

3.Place the tape over the gather, and hold it in place with basting pins.

1 Tape

1

Sewing Utility Stitches 3-47

CONTENTS

1—

2—

3—

4—

5—

6—

7—

8—

9—

?!

Index