Brother ULT2002D operation manual Bar Tacks on Thick Fabrics

4.Check the first needle drop point and lower the presser foot.

1 2 mm (1/16 inch)

1
	5. Lower the buttonhole lever so that it is positioned be-
5	hind the metal bracket on the buttonhole foot.
6	1 Metal bracket
	1
5	6. Gently hold the end of the upper thread and begin sew-
	ing. When sewing is completed, the machine will sew
	reinforcement stitches and stop automatically.
6

CONTENTS

1—

2—

3—

4—

5—

6—

7—

6

1

2

Bar Tacks on Thick Fabrics

Place a piece of folded fabric or cardboard beside the fab- ric being sewn to level off the buttonhole foot and allow for easier feeding.

Note

If automatic thread cutting is turned on before you start sewing, both threads are automatically cut after the rein- forcement stitches are sewn. If the fabric does not feed (for example, because it is too thick), increase the stitch length setting.

1Presser foot

2 Thick paper

8—

9—

?!

3-60 Sewing Utility Stitches

Index