Brother ULT2002D operation manual Index

Attaching the Embroidery Unit

CAUTION

Be sure to turn off the power before installing the em- broidery unit, otherwise, the machine may be dam- aged.

1. Turn off the power, and remove the flat-bed attach- ment.

2. Open the cover of the connection port, as shown in the illustration.

Note

Be sure to replace the cover when the embroidery unit is not installed.

CONTENTS

1 —

2 —

3 —

4 —

5 —

1 2

3.Insert the embroidery unit connection into the machine connection port. Push lightly until the unit clicks into place.

1Embroidery unit connection

2 Machine connection port

CAUTION

•Be sure there is no gap between the embroidery unit and the sewing machine. If there is a gap, the em- broidery patterns will not embroider with the correct registration.

•Do not push on the carriage when installing the em- broidery unit onto machine. Moving the carriage may damage the embroidery unit.

4.Turn on the main power switch. The screen at left will display.

6 —

7 —

8 —

9 —

?!

Embroidery

5-5

Index