Brother ULT2002D operation manual Index

5

6

5

6

13.Slowly return the needle threader lever to its original position. Check that the hook has pulled the thread through the eye, then release the lever.

14.Pull the thread loop toward the back of the machine.

Note

Do not pull the thread too strongly, as you may bend the needle.

CAUTION

The needle threader lever can only be used with home sewing machine needles size 75/11-100/16. Check the table on page 1-45for appropriate needle and thread combinations. Note that, if you are using transparent nylon mono-filament thread, only needles in the range of 90/14-100/16 can be used.

CONTENTS

1—

2—

3—

4—

5—

5

6

1

15.Pass the thread under the presser foot, and pull it about 100 mm (3 inch - 4 inch) toward the back of the ma- chine.

1100 mm (3 inch - 4 inch)

CAUTION

•If the threading is not successful, raise the presser foot lever and start again from step 8, setting the thread in the needle clamp thread guide.

•There are certain decorative threads that can not be threaded using the needle threader lever. When using these threads, set the thread behind the needle clamp thread guide (step 8), then thread the eye of the nee- dle manually. Make sure the main power switch is OFF when threading the needle manually.

6—

7—

8—

9—

?!

1-36 Setting Up

Index