Brother ULT2002D operation manual Is pressed

17.

This message is dis- played when the embroidery unit is attached and the power is turned on with the needle in the down position.

18.

This message is dis- played when the buttonhole lever is up, a buttonhole stitch is selected, and the “Start/ Stop” button or “Re- verse/Reinforcement Stitch” button is pushed.

19.

This message is dis- played when there are too many characters and the curved charac- ter configuration is impossible.

20.

This message is displayed when the machine is in embroidery mode and the combined character pattern is too large for the embroidery frame. You can rotate the pattern 90 degrees and continue combining characters.

21.

This message is dis- played when there is no stitch or embroidery pattern selected and the “Start/Stop” button, the “Reverse/Reinforcement Stitch” button, or

is pressed.

9-12 Troubleshooting

	CONTENTS
22.	1 —
This message is dis-
played when the
machine is in embroi-
dery mode, and the
character pattern	2 —
combination is too large
to fit in the embroidery
frame.
23.	3 —

This message is dis- played when the machine is in embroi- dery mode and the medium frame is

attached, and the 4 — selected pattern does

not fit in the medium frame.

24.	5 —
This message is dis-
played when the
machine is in embroi-
dery mode and the
small frame is attached,	6 —
and the selected pattern
does not fit in the small
frame.
25.	7 —
This message is dis-
played when the
machine is in embroi-
dery mode and the
embroidery unit tries to	8 —
initialize while the
embroidery frame is
attached.
26.	9 —
This message is dis-	?!
played when the
machine is ready to sew
an embroidery pattern,
and the “Start/Stop”
button is pushed while
the embroidery frame is
not attached.
	Index