Brother ULT2002D operation manual Make sure the needle does not strike the zipper

CONTENTS

3

1

2

4.Remove presser foot “J”. Align the right side of the pin in zipper foot “I” with the presser foot holder, and at- tach the zipper foot.

1 Right

2 Left

3 Needle drop position

CAUTION

When using zipper foot “I”, make sure the straight stitch, middle needle position is selected. Turn the balance wheel to make sure the needle does not strike the presser foot. If another stitch is selected, the needle will strike the presser foot, causing the needle to break and possible leading to injury.

1—

2—

3—

5. Topstitch 7 to 10 mm (1/4 to 3/8 inch) from the seamed edge of the fabric, then remove the basting.

4 —

CAUTION	5 —
Make sure the needle does not strike the zipper
during sewing. If the needle strikes the zipper, the
needle may break, leading to injury.

6 —

■ Inserting a Side Zipper

Use for side zippers in skirts or dresses.

1. Select . 7 —

CAUTION

Make sure you sew using the middle needle position.

8 —

9 —

?!

3-68 Sewing Utility Stitches

Index