Chapter 7 MY CUSTOM STITCH

DESIGNING THE STITCH

With the MY CUSTOM STITCHTM function, you can sew designs that you create yourself.

Note

Stitches that you create with MY CUSTOM

1 STITCHTM can be a maximum of 7 mm (9/32 inch) wide and 37 mm (1-1/3 inch) long.

• Stitches can be designed more easily with MY CUSTOM STITCHTM if you draw the stitch on the enclosed grid sheet first.

3

1. Draw the stitch design on the grid sheet (part code

 

 

SA507, X81277-001).

2

1 Start point

 

2 End point

 

3 Intersection

Note

Simplify the design so that it can be sewn as a continuous line. For a more attractive stitch, close the design by intersecting lines.

If the design will be repeated and linked, the start point and end point of the design should be at the same height.

CONTENTS

1

2

3

4

5

2.Mark the points in the design where the direc- tion of the stitching changes.

3.Determine the x and y coordinates of each of the marked points. This will determine the de- sign of the stitching that will be sewn.

6

7

8

9

?!

My Custom Stitch

7-1

Page 276
Image 276
Brother ULT2002D operation manual MY Custom Stitch, Designing the Stitch