Brother ULT2002D operation manual Index

■Inserting the Fabric

CAUTION

If the fabric is placed loose in the embroidery frame the embroidery design will sew out poorly. Insert the fabric on a level surface, and gently stretch the fabric tight in the frame. Follow the steps below to insert the fabric correctly.

CONTENTS

1 —

2 —

1

2

3

1.Loosen the adjustment screw on the outer embroidery frame. Lay the fabric on the outer frame, then insert the inner frame, clamping the fabric between the frames.

*Be sure to align the inner frame’s with the outer frame’s .

1 Inner frame

2 Outer frame

3 Adjustment screw

3 —

4 —

2.Slightly tighten the adjustment screw, then remove the slack of fabric by pulling on edges and corners. Do not loosen the screw.

* When using the large frame, tighten the adjustment screws at the top and bottom of the frame, so that the spaces at the top and bottom of the frame are equal.

3.Gently stretch the fabric tight, and tighten the frame adjustment screw. This keeps the fabric from loosen- ing after stretching.

* After stretching the fabric, make sure the fabric is taut.

* Make sure the inside and outside frames are even be- fore you start embroidering.

2

1 Outer frame

1 3 2 Inner frame

3 Surface of fabric

Note

Stretch the fabric by all four corners and all four edges. While stretching the fabric, tighten the frame adjust- ment screw.

5-22 Embroidery

5 —

6 —

7 —

8 —

9 —

?!

Index