Brother ULT2002D Basic Sewing of Character/Decorative Stitches, When Sewing Character Stitches

Basic Sewing of Character/Decorative Stitches

5	1.	Select a stitch pattern.
	2.	Attach monogramming foot “N”.
	3.	Place the fabric under the presser foot, pull the upper
		thread out to the side and then lower the presser foot.
6

CONTENTS

1 —

2 —

3 —

5

6

4. Press the “Start/Stop” button to begin sewing.

CAUTION

When sewing 7 mm satin stitch patterns and the stitches are bunched, lengthen the stitch length. If you continue sewing when the stitches are bunched, the needle may bend or break. (See “Set- ting the Stitch Length”.)

*If the fabric is pulled or pushed during sewing, the pat- tern may not turn out correctly. Also, depending on the pattern, there may be movement to the left and right as well as front and back. Therefore, guide the fabric with your hand to keep the fabric feeding straight and even during sewing.

5.Press the “Start/Stop” button to stop sewing, then press the “Reverse/Reinforcement Stitch” button to sew re- inforcement stitches.

4 —

5 —

6 —

7 —

5

6

When Sewing Character Stitches

When sewing is finished, the machine will automatically sew reinforcement stitches, then stop.

Note

When sewing character stitches, the machine automati- cally sews reinforcement stitches at the beginning and end of each character.

8—

9—

?!

Sewing Character/Decorative Stitches

4-9

Index