Brother ULT2002D operation manual Basting

Basting

1. Select .

2.Attach presser foot “J”. Press the “Reverse/ Reinforce- ment Stitch” button to sew reinforcement stitches, then continue sewing.

Note

• If you do not want to use a reinforcement stitch at the beginning, you should lift the presser foot, rotate the balance wheel, pull up the bobbin thread and pull a length of top and bobbin thread out from the rear of the machine.

•You can set the stitch length between 5 mm (3/16 inch) and 30 mm (1-3/16 inch)

1 Between 5mm (3/16 inch) and 30 mm (1-3/16 inch)

	1
3.	Sew while keeping the fabric pulled tight.
4.	End the basting with reinforcement stitches.
6
Sewing Utility Stitches		3-19

CONTENTS

1—

2—

3—

4—

5—

6—

7—

8—

9—

?!

Index