Brother ULT2002D operation manual Viewing the LCD Display

Viewing the LCD Display

When switching on machine, the screen will display the name of the machine. Touch the screen to display the utility stitch. The often used “Straight stitch (left)” (1-01) is automatically selected.

CONTENTS

1 —

1	2
3
4
5

1Shows the amount of thread remaining in the bobbin during sewing. If the display is yel- low, the bobbin is running out of thread.

Note

This bobbin symbol does not show the amount of bobbin thread remaining when the machine is not sewing.

2Shows single or twin needle mode setting, and the needle stop position.

6

Single needle/	Single needle/
down position	up position

2 —

3 —

4 —

5 —

6 —

Twin needle/	Twin needle/
down position	up position

3Presser foot code. Attach the presser foot in- dicated in this display before sewing.

4Shows the name and code number of the se- lected stitch.

5Shows a preview of the selected stitch.

6To select, press the key of the stitch pattern you want to sew.

7 —

8 —

9 —

?!

Setting Up

1-13

Index