Brother ULT2002D operation manual Shelf Spring Reattach the needle plate

1

5

2

1

4. Remove the race.

*While pushing the race towards the back of the ma- chine, lift the edge nearest you and remove the race.

1 Race

5.Remove accumulated lint and thread from the inner shuttle and race with a brush or vacuum cleaner.

*Do not oil the shuttle or the race.

1 Shuttle

2 Brush

CONTENTS

1 —

2 —

3 —

4 —

5 —

1

2

▼

6.Check that the notch on the shuttle is in the same posi- tion as when you removed the race. Position the race so that the shelf and spring are aligned, and insert the race.

CAUTION

•Do not use a damaged race or shuttle. Other- wise, the thread may tangle and cause a poor finish, or the needle may break. You can get the proper parts from your authorized dealer.

•Be sure to insert the race in the correct posi- tion. Otherwise, the needle may break.

1Shelf

2 Spring

6 —

7 —

8 —

9 —

?!

7. Reattach the needle plate.

Care and Maintenance

8-3

Index