■Saving Your Preferred Stitch Settings
The settings for zigzag stitch width, stitch length, thread tension, automatic thread cutting or auto- matic reinforcement stitching, etc., are preset by the computer for each stitch pattern. If you want
to change those settings, input the new settings and press 
for each pattern you want to change. The new settings will replace the computer settings.
Example: You always use a length setting of
2.0mm (1/16 inch) for a straight stitch
1.Select the straight stitch.
2.Set the length to 2.0 mm (1/16 inch), and press 
.
3.Go back to the original screen, or turn off the machine. The next time you select the same straight stitch, the stitch length setting should be 2.0 mm, as you saved it.
CAUTION
•You can change any of the settings on the
screen in the same manner.
•If you do not press 
or 
after saving the new stitch settings, the new stitch settings will be displayed whenever you select that stitch, even after turning off the power.
CONTENTS
1—
2—
3—
4—
5—
6—
7—
* Press 
to return to the original machine settings.
8 —
9 —
?!
Sewing Utility Stitches |
