If Memory Lock Settings in Communications Settings in System Settings (from the Additional Functions screen) is set to 'On', received documents are stored in memory instead of being printed.
Follow the procedure below to manually switch the machine into the Memory Lock mode if the Memory Lock timer has not been set, or of you want to switch the machine into the Memory Lock mode before the timer automatically activates the Memory Lock mode.
IMPORTANT
No more documents can be received in memory if any of the following is true: (The numbers below may vary depending on the remaining capacity of the hard disk.)
-When a total of 2,000 documents have been stored in any or all of the inboxes
-When a total of 8,000 pages have been stored in any or all of the inboxes
-When a total of 32 or more received documents or reports are waiting to be printed while the machine is out of the correct sized paper.
NOTE
•To set the Memory Lock mode, press 
(Additional Functions) ➞[System Settings] ➞ [Communications Settings] ➞[Memory Lock Settings] ➞set the Memory Lock mode to 'On'. (See "Saving Received Documents in Memory," on p.
•If the Memory Lock RX mode is set to 'On', <Memory Lock> appears on the Fax Basic Features screen. If you set the Memory Lock RX mode with the Forward mode, <Forward> appears on the Fax Basic Features screen.
1 Press [Special Features] ➞[RX Mode] .
2
Basic Send and Receive Methods
Receiving Print Jobs and Fax Documents |