Appendix
9
This report is used to check whether documents were sent successfully to the intended destinations when a sequential broadcast transmission was performed.
You can set whether to automatically print a Multiple Communication Result Report after sending documents. (See "TX Report," on p.
NOTE
•You can also print a Multi TX/RX Report with an image of the sent original attached to it. (See "TX Report," on p.
•The default setting is 'For Error Only'.
■JOB NO.
The four digit number, that is automatically assigned when the document is accepted for sending, is printed.
■DEPT. ID
If Department ID Management is set, the Department ID is printed.
■PGS.
The number of pages that were sent successfully to the destinations is printed.
■TX/RX INCOMPLETE
If a transmission is incomplete, the fax number and the name of the destination are printed. If there is no applicable destination, "_ _ _" is printed.
■TRANSACTION OK
The fax number and the name of the destination of a completed transmission are printed. If there is no applicable destination, "_ _ _" is printed.
■ERROR
If an error in transmission occurs, the fax number and the name of the destination are printed. If there is no error, "_ _ _" is printed.