Error Messages
This section explains the various messages that appear on the touch panel display, along with possible causes and remedies.
For explanations of messages that are not listed here, see the Reference Guide and Network Guide.
Self-Diagnostic Display
Perform the necessary procedures according to the displayed
•When scanning or printing cannot be performed because of an operational error
•When you need to make a decision or take some action during scanning or printing
•When you need to make a decision or take some action while browsing the network
The following is a list of
Set the IP Address.
Cause | This machine is not set with an IP address. |
|
|
Remedy | Specify the IP Address Settings in TCP/IP Settings in Network Settings in |
| System Settings (from the Additional Functions screen), and turn the machine's |
| main power OFF, and then back ON. |
No response from the server. Check the settings.
Cause | The specified server settings are incorrect, or the server is not turned ON. |
| Alternatively, the machine's TCP/IP resources may be low. |
|
|
Remedy | Wait for a while, and then try browsing again. If there is still no response from |
| the server, try selecting another server. |
Troubleshooting
8
Error Messages |