Canon 2230, 2830, 3530 Relay Memory Box

NOTE

•If you make a mistake when entering the subaddress/password, press (Clear) ➞ enter the correct subaddress and password.

•If you want to cancel storing the subaddress/password, press [Cancel].

10 Press [Done] repeatedly until the Fax Basic Features screen appears.

Relay Memory Box

A Relay Memory Box enables you to forward received documents to a number of specified destinations at a specified time, using the machine as a relay unit.

You can set the Relay Start Time, and relay all of the documents stored in the memory box at the same time. (See "Memory Boxes," on p. 3-5.)

You can specify the following items for the Relay Memory Box.

Item	Description	Setting
		Relay*1
Memory Box Name	Sets the memory box name.	24 characters
		maximum
	Sets a password to control the memory box.	Not required
	It is necessary to enter the password to
Password		A one to seven digit
	change the contents of the memory box, or to
		number
	print documents received in the memory box.
	Sets an ITU-T standard subaddress. A	Required
		Numbers, #, *, and
Subaddress	subaddress is required to distinguish a Relay
		spaces can be used
	Memory Box from other memory boxes.
		(up to 20 digits).
	Sets an ITU-T standard password. If a	Not required
	password has been set, the password added
		Numbers, #, *, and
RX Password	to the received documents is compared with
		spaces can be used
	the set password. If the passwords do not
		(up to 20 digits).
	match, the documents are not received.
		Specify the
Relay Sending	Sets the destination to which the received	destination using the
Destination	documents in the memory box are sent.	Address Book or
		Coded Speed Dialing.

*1 Indicates the default setting.

5

Customizing Fax Settings

Setting Up Memory Boxes 5-71