Troubleshooting
8
# 701
Cause | The specified Department ID does not exist, or the password has changed. |
|
|
Remedy | Enter the correct Department ID or password using - (numeric keys) on |
| the control panel, and try sending again. |
|
|
# 702 |
|
|
|
|
|
Cause | The document could not be sent because the memory is full. |
Remedy 1 Wait a few moments, and try again after other send jobs complete.
Remedy 2 Do not send the document to too many recipients at the same time. Send the document to a smaller number of recipients.
# 703
Cause | The memory for the image data is full. |
Remedy 1 Wait a few moments, and try again after other send jobs complete.
Remedy 2 Erase documents stored in inboxes. If the machine still does not operate normally, turn the main power OFF, and then back ON.
# 704
Cause | An error occurred while reading address information from the Address Book. |
|
|
Remedy | Check the address settings. If the machine still does not operate normally, turn |
| the main power OFF, and then back ON. |
|
|
# 706 |
|
|
|
Cause | The Address Book is being imported or exported from the Remote UI, or it is |
| being used by another sending component. |
|
|
Remedy | Wait until the Address Book Import/Export function from the Remote UI or the |
| other sending component is complete, and try sending again. |
|
|
# 711 |
|
|
|
Cause | The inbox memory is full. |
|
|
Remedy | Erase unnecessary documents stored in the inbox. (See "Printing and Erasing |
| Documents," on p. |
| an Inbox," in the Mail Box Guide.) |