Document cannot be sent.
Q Is the telephone line type set correctly?
ACheck the type of telephone line that has been set. (See "Selecting the Type of Telephone Line," on p.
QIf you are sending with a subaddress, did you enter the correct subaddress and password for the destination?
A Check the subaddress and password settings.
Memory is full.
Q Are unnecessary documents stored in memory?
ACheck the TX Document and RX Document memory, and erase unnecessary documents or documents with errors from memory. (See "Printing and Erasing Documents," on p.
The document does not print clearly on the remote machine.
Q Is the platen glass clean?
AUse your machine to make a copy of the document, and check it for streaks. If streaks appear, clean the platen glass. (See Chapter 7, "Routine Maintenance," in the Reference Guide.)
The density of the documents sent to a remote machine is too light.
Q Is the Density mode set to 'Light' and the Image Quality mode set to 'Photo'?
ASet the Density mode to 'Dark', and the Image Quality mode to 'Text'. Try sending the document again. (See "Resolution, Density, and Image Quality," on p.
Troubleshooting
8
When Problems Occur |