1
Introduction to Fax Functions
If the following screen is displayed, follow the instructions on the touch panel display ➞press 
(Start) once for each original. When scanning is complete, press [Done].
Scanning starts.
The scanned data is sent to the specified destination when scanning is complete.
IMPORTANT
The size of the original is detected automatically. However, if the output paper in the recipient's machine is not equal to the scanned document size, the original image may be reduced in size to match it.
8 If you want to cancel sending, press 
(Stop).
9
NOTE
•You can press 
(Stop) to cancel a send job that is being scanned.
•For instructions on canceling a send job, see "Canceling a Job," on p.
•You can also cancel a send job from the System Monitor screen. (See "Using the System Monitor Screen," on p.
9 When scanning is complete, remove your originals.