2 Make sure the machine is ready to send ➞ press [Stamp].
A check mark (
) appears in the box to the left of [Stamp].
NOTE
To cancel the Stamp mode, press [Stamp] again.
3 Specify the destination ➞ press 
(Start).
Scanning starts.
A stamp mark (
) appears on the original.
NOTE
•For instructions on specifying the destination, see "Dialing Methods," on p.
•If the stamp is not marked clearly, see Chapter 7, "Routine Maintenance," in the Reference Guide.
2
Basic Send and Receive Methods
Sending Methods |