Canon 2300 manual Auto Zoom, Set the copy ratio using the numeric keys press OK, Press Start

@.	ABC	DEF	3 Set the copy ratio using the numeric keys ➞ press [OK].
GHI	JKL	MNO
1	2	3
4	5	6	If you make a mistake when entering the value, press C (Clear), and enter the
PQRS	TUV	WXYZ
7	8	9	correct value.
	OPER	SYMBOLS
	0		If you enter a value outside the setting range, an error tone sounds. If the value
	OK		you entered is less than 50, the copy ratio is automatically changed to 50%. If the
			value you entered is greater than 200, the copy ratio is automatically changed to
			200%. Enter a value within the setting range.

The selected mode is set, the Copy Basic Features screen returns, and the selected copy ratio is displayed.

Start4

Press [Start].

Copying starts.

NOTE

To return the copy ratio to 100%, press F1 (COPY RATIO) ➞ F1 (DIRECT 100%).

To cancel all settings and restore the machine's standard settings, press (Reset).

Auto Zoom

This mode enables you to have the machine automatically select the appropriate copy ratio based on the size of the original and the selected copy paper. The available copy ratios are from 50% to 200%.

IMPORTANT

You cannot use the Auto Zoom mode with Automatic Paper Selection.

You cannot copy highly transparent originals, such as transparencies, using the Auto Zoom mode. Use the Preset Zoom or Zoom Designation modes.

To use the Auto Zoom mode, your originals must conform to a standard paper size: 11'' x 17'', LGL, LTR, LTR , or STMT.

COPY 1 Press [COPY].

COPY lights, and the Copy Basic Features screen appears.

2

Basic Copying Features

Changing the Copy (Zoom) Ratio 2-17