Auto Sort, Mm to 20 mm press OK | Canon 2300 instruction

F2	3 Press [F2] (-) or [F3] (+) to set the desired frame erase width

F3	(01 mm to 20 mm) ➞ press [OK].
OK	You can also use the numeric keys to enter the standard frame erase width, and
	C (Clear) to clear the value.

If you enter a value outside the setting range, an error tone sounds. Enter a value within the setting range.

The selected mode is set, and the COPY SETTINGS menu returns.

Reset 4

Press [Reset] to return to the Basic Features screen.

Auto Sort

This setting allows automatic selection of the Collate mode when the originals are placed in the feeder. This is helpful when making multiple copies, because you do not need to remember to select the collating mode.

4

Customizing Settings

Additional Functions

F3

F4

OK

NOTE

The default setting is '01 ON'.

1 Press [Additional Functions] ➞ press [F3] (▼) or [F4] (▲) to highlight <02 COPY SETTINGS> ➞ press [OK].

The COPY SETTINGS menu appears.

Changing the Current Standard Settings

4-9

Image 86

Canon 2300 manual Auto Sort, Press F2 or F3 + to set the desired frame erase width, Mm to 20 mm press OK

Contents

Page ImageCLASS 2300 Copying Guide Manuals for the Machine Set-Up Sheet For the Machine For Networking and Printing How This Manual Is Organized Appendix Contents Appendix Special Copying FeaturesCustomizing Settings Keys Used in This Manual How to Use This ManualSymbols Used in This Manual Vii Copyright Legal NoticesTrademarks Disclaimers Introduction to Copying Overview of the imageCLASS Copy Basic Features ScreenSpecial Features Screen Additional Functions Menu Flow of Copy Operations Press Copy to display the Copy Basic Features screenIf the message Enter Department ID and Password appears Place your original Enter the copy quantity Set the desired copy mode on the Copy Basic Features screenSet the desired copy modes on the Special Features screen Press Start If you want to stop a copy job while scanning If you want to cancel a copy job in the standby mode If you want to interrupt a copy job Feeder Placing OriginalsPlaten Glass Orientation Vertical Placement Horizontal Placement FeederVertical Placement Horizontal Placement Platen Glass Place your original face down Platen GlassLift up the feeder Gently lower the feeder Copyingto Introduction Caution Feeder Speciﬁcations Adjust the slide guides to ﬁt the size of your originals To Copying Original Output Tray Press Stop to stop scanning Canceling a Copy JobUsing the Stop Key If only one copy job is being processed Press F4 Cancel Using the System Monitor ScreenPress F2 or F3 to select the job to be canceled Press Monitor Copy 1 Press Copy Reserved CopyingReserving Copy Jobs While Printing Place your original, and set the desired copy modes Reserved Copying Interrupt Mode Press Interrupt Once the original is scanned, remove it from the machine 22Interrupt Mode Basic Copying Features Changing the Copy Quantity Copy QuantitySpecifying the Required Number of Copies Copy Quantity Paper Selection Automatic Paper Selection Place your original press F2 Paper Select Make sure that Auto Paper is selected press OK Manual Paper Selection Each time you press Press F3 or F4 to select the desired paper sizeIf you want to use the stack bypass Paper Size setting menu returns Image Quality Manual Text Mode Text/Photo ModeCopy Exposure Manual Copy Exposure and Image Quality Automatic Place your original press F3 Density Press F1 Light or F3 Dark to adjust the exposure press OKCopy Exposure Manual Image Quality Manual Press F4 to select the image quality of the original Text Copy Exposure and Image Quality AutomaticPlace your original press F4 Imagequality TEXT/PHOTO, or Photo press OK Press F2 Auto Exposur OK Zoom by Percentage Preset ZoomChanging the Copy Zoom Ratio Auto Zoom Reduce Preset ZoomPlace your original press F1 Copy Ratio Enlarge Zoom by Percentage Each time you press Reduce or Auto Zoom Set the copy ratio using the numeric keys press OK200%. Enter a value within the setting range Correct value Press OK Press F1 Copy Ratio Start Collating Copies If the Collate Mode Is SetIf the Rotate Mode Is Set Originals Set Result Place your originals press Collate If you want to set the Rotate modeOrder Collate 22Collating Copies Special Copying Features Place your original on the platen glass press Special Features to select a copy functionTwo-Page Separation Original Press F3 Left Opening or F4 Rght Opening to select FeaturesPress F1 2-PAGE SEP Direction that the book opens press OK Special Copying Features Press F4 Orignal Size to select the paper size press OK Margin Mode Margin press OK Press F2 MarginMARGIN, or F4 Bottom Mrgn to specify the type Press F3 or F4 + to set the margin width 1 mm to Copying starts If you want to cancel this mode, press Frame Erase Original Frame Erase Hole Punch Erase Book Frame Erase Mode Original Selected Copy Not SelectedBook Frame Erase Press F3 Frame Erase Lights, and the Copy Basic Features screen appearsOriginal Frame Erase Make sure that Frame Erase is selected press OK Press Start Features Book Frame Erase Special Copying Features Hole Punch Erase Press F4 Orignal Size to select the size of the original 16Frame Erase Original Vertical Placement Copy Image Combination Original Vertical Placement Place your originals press Special Features Press F4 Layout Copy If you selected 2 on 1 Comb in step If you selected 4 on 1 in step Number of Copies, on p Paper size press OKSize Different Size Originals Mode Set the desired copy modes Press Start 24Different Size Originals Customizing Settings Copy Settings Table Available Settings Applicable Press Additional Functions Changing the Current Standard SettingsImage Quality and Copy Exposure Press F3 or F4 to highlight 01 STD Image QUAL/ EXP press OK Press F3 or F4 to highlight 02 Copy Settings Press OKPress Reset to return to the Basic Features screen Zoom Ratio Press F3 or F4 to highlight 02 STD Zoom Ratio Press OK Clear to clear the value Copy Quantity50% to 200% press OK Press F3 or F4 to highlight 03 Standard Copy QTY press OK Frame Erase Width Press F3 or F4 to highlight 04 Frame Erase Width press OK Mm to 20 mm press OK Auto SortPress F2 or F3 + to set the desired frame erase width Press F3 or F4 to select 01 on or 02 OFF Sort RotatePress F3 or F4 to highlight 05 Auto Sort Press F3 or F4 to highlight 06 Sort Rotate Sharp SharpnessDull Original Copy Dull Is Set Dull Is Not Set Press F3 or F4 to highlight 08 Sharpness press OK Prescan Press F3 or F4 to highlight 09 Prescan press OK If you want to use the prescan function, select 01 on Using Shortcut Keys Assigning Functions Press F3 or F4 to highlight 07 Shortcut KEY SET press OK Setting Applicable That contains the copy mode you want to setIf necessary, specify the settings for each mode Making Copies Appendix Combination of Functions Chart Combination unavailable Combination available Combination unavailable Function to Be Set Set Originals Size Different Index Numerics Appendix 8Index