16Frame Erase | Canon 2300 guide

3

Special Copying Features

F3

F4

OK

@.

ABC

DEF

1 2 3

GHI JKL MNO

4 5 6

PRS TUV WXY

7 8 9

OPER SYMBOLS

0

Start

The machine automatically selects the copy paper size according to the original size you set. <AUTO PAPER> is displayed; however, you can also select the paper size manually.

6 Press [F3] (-) or [F4] (+) to set the desired hole punch erase width (3 mm to 20 mm) ➞ press [OK].

You can also use the numeric keys to enter the hole punch erase width, and C (Clear) to clear the value.

If you enter a value outside the setting range, an error tone sounds. Enter a value within the setting range.

The selected mode is set, and the Copy Basic Features screen returns.

NOTE

The default setting is '18 mm'.

7 Enter the desired copy quantity (1 to 99) using the numeric keys.

For details about entering the copy quantity, see "Specifying the Required Number of Copies," on p. 2-2.

8 Press [Start].

Copying starts.
NOTE
If you want to cancel this mode, press					(Stop) ➞ the cancel job display appears
➞ press	F3	(YES) or	F4	(NO).
➞ press		(YES) or		(NO).
If you press		(Stop) after copying has started, some blank sheets of paper may
print out.

To cancel all settings and restore the machine's standard settings, press (Reset).

3-16Frame Erase

Image 69

Canon 2300 manual 16Frame Erase

Contents

Page ImageCLASS 2300 Copying Guide Set-Up Sheet For the Machine For Networking and Printing Manuals for the Machine Appendix How This Manual Is Organized Contents Special Copying Features Customizing SettingsAppendix How to Use This Manual Symbols Used in This ManualKeys Used in This Manual Vii Trademarks Legal NoticesCopyright Disclaimers Introduction to Copying Copy Basic Features Screen Special Features ScreenOverview of the imageCLASS Additional Functions Menu Press Copy to display the Copy Basic Features screen If the message Enter Department ID and Password appearsFlow of Copy Operations Place your original Set the desired copy mode on the Copy Basic Features screen Set the desired copy modes on the Special Features screenEnter the copy quantity If you want to stop a copy job while scanning Press Start If you want to interrupt a copy job If you want to cancel a copy job in the standby mode Placing Originals Platen GlassFeeder Vertical Placement Horizontal Placement Vertical Placement Horizontal Placement FeederOrientation Platen Glass Platen Glass Lift up the feederPlace your original face down Copyingto Introduction Caution Gently lower the feeder Speciﬁcations Feeder Adjust the slide guides to ﬁt the size of your originals Original Output Tray To Copying Using the Stop Key Canceling a Copy JobPress Stop to stop scanning If only one copy job is being processed Press F2 or F3 to select the job to be canceled Using the System Monitor ScreenPress F4 Cancel Press Monitor Reserving Copy Jobs While Printing Reserved CopyingCopy 1 Press Copy Place your original, and set the desired copy modes Reserved Copying Press Interrupt Interrupt Mode Once the original is scanned, remove it from the machine 22Interrupt Mode Basic Copying Features Copy Quantity Specifying the Required Number of CopiesChanging the Copy Quantity Copy Quantity Automatic Paper Selection Paper Selection Make sure that Auto Paper is selected press OK Place your original press F2 Paper Select Manual Paper Selection Press F3 or F4 to select the desired paper size If you want to use the stack bypassEach time you press Paper Size setting menu returns Copy Exposure Manual Text Mode Text/Photo ModeImage Quality Manual Copy Exposure and Image Quality Automatic Press F1 Light or F3 Dark to adjust the exposure press OK Copy Exposure ManualPlace your original press F3 Density Image Quality Manual Place your original press F4 Imagequality Copy Exposure and Image Quality AutomaticPress F4 to select the image quality of the original Text TEXT/PHOTO, or Photo press OK Press F2 Auto Exposur OK Changing the Copy Zoom Ratio Preset ZoomZoom by Percentage Auto Zoom Place your original press F1 Copy Ratio Preset ZoomReduce Enlarge Each time you press Reduce or Zoom by Percentage 200%. Enter a value within the setting range Set the copy ratio using the numeric keys press OKAuto Zoom Correct value Press F1 Copy Ratio Press OK Start If the Rotate Mode Is Set If the Collate Mode Is SetCollating Copies Originals Set Result If you want to set the Rotate mode Order CollatePlace your originals press Collate 22Collating Copies Special Copying Features Two-Page Separation Features to select a copy functionPlace your original on the platen glass press Special Original Press F1 2-PAGE SEP FeaturesPress F3 Left Opening or F4 Rght Opening to select Direction that the book opens press OK Press F4 Orignal Size to select the paper size press OK Special Copying Features Margin Mode MARGIN, or F4 Bottom Mrgn to specify the type Press F2 MarginMargin press OK Press F3 or F4 + to set the margin width 1 mm to Copying starts If you want to cancel this mode, press Original Frame Erase Frame Erase Book Frame Erase Mode Original Selected Copy Not Selected Book Frame EraseHole Punch Erase Original Frame Erase Lights, and the Copy Basic Features screen appearsPress F3 Frame Erase Make sure that Frame Erase is selected press OK Press Start Book Frame Erase Features Special Copying Features Hole Punch Erase Press F4 Orignal Size to select the size of the original 16Frame Erase Image Combination Original Vertical Placement Copy Original Vertical Placement Press F4 Layout Copy Place your originals press Special Features If you selected 4 on 1 in step If you selected 2 on 1 Comb in step Paper size press OK SizeNumber of Copies, on p Mode Different Size Originals Set the desired copy modes Press Start 24Different Size Originals Customizing Settings Available Settings Applicable Copy Settings Table Changing the Current Standard Settings Image Quality and Copy ExposurePress Additional Functions Press F3 or F4 to highlight 02 Copy Settings Press OK Press Reset to return to the Basic Features screenPress F3 or F4 to highlight 01 STD Image QUAL/ EXP press OK Press F3 or F4 to highlight 02 STD Zoom Ratio Press OK Zoom Ratio Copy Quantity 50% to 200% press OKClear to clear the value Press F3 or F4 to highlight 03 Standard Copy QTY press OK Press F3 or F4 to highlight 04 Frame Erase Width press OK Frame Erase Width Auto Sort Press F2 or F3 + to set the desired frame erase widthMm to 20 mm press OK Sort Rotate Press F3 or F4 to highlight 05 Auto SortPress F3 or F4 to select 01 on or 02 OFF Press F3 or F4 to highlight 06 Sort Rotate Dull SharpnessSharp Original Copy Dull Is Set Dull Is Not Set Press F3 or F4 to highlight 08 Sharpness press OK Press F3 or F4 to highlight 09 Prescan press OK Prescan If you want to use the prescan function, select 01 on Assigning Functions Using Shortcut Keys Press F3 or F4 to highlight 07 Shortcut KEY SET press OK If necessary, specify the settings for each mode That contains the copy mode you want to setSetting Applicable Making Copies Appendix Combination unavailable Combination of Functions Chart Combination available Combination unavailable Set Function to Be Set Originals Size Different Numerics Index Appendix 8Index